Flytec 6015 * Manuel d'utilisateur télécharger pdf (Page 11)

Operation Manual Flytec 6015 9

2 Functions

2.1 Altimeter and atmospheric pressure

The 6015-GPS provides 3 altitude displays and 1 QNH pressure indicator.

ALT1

The altimeter absolute altitude shows the altitude over sea level. (meter „m“ or feet „ft“)

ALT2 alternatively: - GPS altitude

- Flightlevel pressure altimeter display in relation to 1013hPa

- meter or feet inverse to ALT1 (Absolute A1)

- Relativ Altimeter

ALT3

The altimeter relative altitude shows the altitude towards a reference point.

QNH

Actual air pressure at sea level in relation to ALT1

2.1.1 Altimeter Alt1, absolute altitude

Shifting between display screens Alt1 and Alt2 is effected by shortly

pressing the Alt1/Alt2 key.

Altitude display Alt1 indicates always the absolute pressure altitude above sea level.

After switch-on the altimeter ALT1 is automatically adjusted to GPS altitude by the instrument.

After switch-on the display is flashing until the GPS-receiver has calculated a precise

altitude for adjustment.

Units m / ft. - re-setting: see Menu



Instrument settings



Units

2.1.1.1 Manual setting of altimeter Alt1

Set mode A1 of altimeter is called-up by long pressure on the

ALT1 key. The possible settings are shown in the information

field.

By brief pressure on one arrow key the readout value can be

adjusted meter by meter.

Under keystroke the display shall be

changed automatically until the key is released.

Due to this adjustment the QNH display is also altered.

Adopt GPS altitude with F2 key

By brief pressure on the F2 key it is possible to adopt the GPS

altitude.

Please consider that the GPS-receiver does not always provide

the reliable altitude value! In case of poor Satellite constellation or bad

reception, altitude deviation of +/- 50 m will occur!

Setting altitude to pressure standard 1013hPa with F1 key

By brief pressure on the F1 key the altitude is set to 1013hPa (Flightlevel).

Tip: If the user does not know the altitude of his present location, he may operate

the QNH field and, using the arrow keys, by changing the altitude value until it matches

the actual QNH as per weather forecast or indication issued by air traffic management.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Flytec 6015 * Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Flytec 6015 *