Flytec 6015 * Manuel d'utilisateur télécharger pdf (Page 29)

Operation Manual Flytec 6015 27

Comment 1: in the Flight Analysis min. or max. values are displayed which occured during the flight.

The display screen is updated every second and saved for the flight analysis. If one undertakes the

download of such a flight afterwards on the PC using a program such as SeeYou, CompeGPS,

MaxPunkte etc., these programs are only appropriate to evaluate the flight records in IGC format.

In the IGC file peak values and Variometer values are not recorded! In the IGC file are saved

per track point the time (UTC), position, barometric altitude, GPS-altitude and True Air Speed.

Most programs calculate the Variometer values from the altitude data. If for instance, one

has set a recording interval of 10sec., and has covered a height difference of 15m during these

10 seconds, there will be calculated a Vario value of 1.5 m/s. However, during this time a peak

Vario value of 2,4m/s may have been performed. The flight analysis peak values are also presented

in Flychart and are subject to separate readout.

Comment 2: although the instrument is capable to store up to 50 flights, we recommend to save the

flights in regular intervals from the instrument to a PC and to reformat the flight memory afterwards

under Main Setup Menu

⇒

Memory

⇒

Delete all Flights. This procedure ensures the safe data storage

of your precious flights and that the instrument may perform new recordings again with a „refreshed“

flight memory

5 Data transfer

The memory of the 6015-GPS contains all data entered by the pilote, such as Waypoints,

Routes, name of the pilote etc.,

as well as the automatically recorded track log points of the

flights which were performed.

Each one of these track log points contains time of day, position, GPS-altitude, barometric

altitude, as well as the flight speed.

In this way, it is possible to graph the Barogram, variogram,

speed diagram and course of the flight on a map for later evaluation.

In Flychart 4.52 it is even

possible to

show the flight on the PC monitor in 3D over the corresponding landscape.

For this purpose the program Google Earth needs to be installed, along with an active internet

connection.

5.1 Data exchange via PC

The basic equipment of the 6015-GPS includes a data cable for the USB interface Mini B.

Due to this feature the data transfer can be carried out in both directions. The data transmission

is effected via serial interface

COMX with: 57.600 baud; 8 databit; 1 stopbit; no parity; no Xon/Xoff.

The 6015-GPS can also be operated for data readout and entry

via USB interface:

• entire instrument configuration (Menu all functions)

• list of Waypoints

• list of Routes

Only readout of flights saved in the flight memory is possible.

Important: for transmission of a.m. data the connection cable to the PC may only be

plugged into the 6015-GPS while it is switched-off. The instrument shifts automatically

to PC-USB transmission mode.

Important: at first the USB driver from Prolific included in the scope of supply needs to be

installed from the CD. For the installation of Flychart the installation of USB driver is effected

automatically.

For transmission of a saved flight the instructions of the used software are to be followed.

Various software programs allow to create IGC-Files, to some extent even OLC Files.

More detailed information under http://www.onlinecontest.de/holc/ .

We recommend the use of Flychart, which you can download from our website www.flytec.ch

With Flychart it is possible to perform all instrument settings comfortably on the PC!

5.1.1 Flight instrument settings

All settings, such as pilot’s name, time zone, battery type and also all units for the display of

altitude, speed, temperature etc. may be set in Main Menu



Instrument settings to the

personal requirements. By use of the PC software Flychart, it is possible to adjust all

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Commentaires sur ces manuels

Pas de commentaire

Flytec 6015 * Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Flytec 6015 *