Flytec 6015 * Manuel d'utilisateur Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
Operation Manual Flytec 6015-GPS 22
3.4.1.2 > Delete alle WP of the Route
Route
> Edit
> Del all WP
Pressing the OK key on the position delete Route enables the
delete function. For data safety the 6015-GPS prompts once
again: „delete all WP?“. By use of the OK key the deletion can
be confirmed or it can be cancelled with the ESC key and
return is performed to the previous level.
Delete
Route?
Press OK
3.4.2 Flying Routes
Selection and activation (Start) of a Route created in the
Menu is performed by prolonged pressing of the Route key
and confirmation with the F2 key. After acknowledgement
with the F2 key appears the prompt “Enter start time”
> No/Yes
By use of the UP or DOWN key you can switch between
Yes and No.
3.4.2.1 Starting a normal Route
F1 Goto
F2 Route Start
OK
Save Pos
(without entering start time and start cylinder).
Press the OK key, if No is selected in field „Start Time“. After
activation the arrow pointing to the first (next) Waypoint
appears in the compass rose, see picture below.
<Start Time
No
<Start Time
No
<Start Time
Yes
3.4.2.2 Competition Route - Definition and start
Press the OK key, if Yes is selected in field „Start Time“.
After activation appears the input field for definition of start
time, number of Startgates (G:1) and the flight mission, such
as entering- or flying out of the Start Cylinder. (O = flying
out) (O = flying in)
<Start Time
12:00:00
G:1 O
Remark: the setting of cylinder circumference and of WP-
altitude can be entered in Main Menu
Edit Route
select
Waypoint
OK key.
After complete entry the Route is started. Now appears
in the compass rose the arrow pointing tot he first (next)
Waypoint and a small flashing arrow ponting to the next
but one WP.
If the Route has been activated, it remains in active mode
even after switch-off and –on again of the instrument.
It can only be deactivated at this position by the command
Route 7 (Stop) by pressing the F2 key!
F1 Goto
F2 Route 7
OK StorePos
Tip: on page 2 and 3 “Navigation” are displayed Navigation-data, such as the
distance and the direction to the next Waypoint!
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Commentaires sur ces manuels

Pas de commentaire