Flytec 6015 * Manuel d'utilisateur télécharger pdf (Page 7)

Operation Manual Flytec 6015 5

1.3 Keypad

Function related key F1

Function related key F2

1.4 Operation philosophy

The 6015-GPS instrument is very easy to handle and intuitive. Just try it a few times, and you will

discover that one can get along very rapidly with the simple menu structure. However, please note

some essential instructions regarding the various functions.

- White key lettering: display screen shifts such as for ex. ALT1 / ALT2, Vario- acoustic settings,

F1 / F2 key commands and the (

i) information retrieval, can be performed speedily during the flight

by short pressure on the key.

- Yellow key lettering: by long pressure of 3 sec. important functions may be called up directly

during the flight and may also be edited.

The selected function is switched-off after approx.

8 seconds in case of non-use!

- Main menu: all instrument settings, but also Waypoints-, Routes- and flight memory, can be

set prior to the flight via the Main menu (MENU key). It is possible to select within the menu

submenus by use of the up-/down keys and to enter adjustments. The main menu is quitted

automatically at 30 seconds after the last entry.

Tip:

all instrument settings of the Main menu can be set comfortably by use of the freebie PC-

Software Flychart on the PC and be transferred via USB-interface onto the instrument.

1.4.1 Function related keys F1 and F2

Both keys F1 and F2 alter their setting possibility according to selected function or readout

screen. The meaning of the related key is indicated on the display screen.

Example: in setmode ALT 1 the function of F1 is "accept GPS altitude" and the function of F2

is to set the altimeter to „FL 1013mB pressure“!

Audio Volume

Alarm Settings

Altitude display

Shift ALT1 / ALT2

Settings altimeter

Shift graphics display

in setting mode up / down

during flight: insert marker into flight

recording / Memorise position as Waypoint

Acknowledgement key OK

Main Menu

i Info key: display of current

coordinates or of Information

Display shift - time / altitude 3

On/Off key

Escape key

Diff. Altimeter 3 reset to 0

Route or Waypoint

activate / deactivate

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Flytec 6015 * Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Flytec 6015 *