Flytec 6015 * Manuel d'utilisateur télécharger pdf (Page 21)

Operation Manual Flytec 6015 19

3.3.1 Display of actual coordinates

If the 6015-GPS

receives satellites by GPS-Receiver, the actual position is displayed in the

information field of the instrument by briefly pressing the key

i Info.

After 20 sec. the previous display screen will automatically reappear. This function is useful in

relaying your location to some person after landing for your pick-up from there. Also when entering

a Waypoint with WP



OK Memorise Pos. the coordinates are displayed.

3.3.2 Memorising the actual position

It may happen from time to time that the current position

should be saved as a Waypoint. For this purpose the

WP key should be pressed for 3 seconds and subsequently

⇒

OK Memorise Pos. In response a beep will chime and the

momentary coordinates shall be saved in the memory as a

waypoint.

As the Waypoint name the 6015-GPS uses the letter W

(for Waypoint) followed by the actual date and the time of

day in UTC.

Example: W220409 111645 stands for 22nd April at

11 hours 16 min 45 sec (UTC).

F1 Goto

F2 Route

Pos  WP

Naturally this Waypoint name may later be amended into a

more meaningful name, for ex. „Fiesch Airfield".

(see keypad functions 3.3.3.2)

3.3.3 Waypoints, alter, delete or adding

Waypoints can be managed and edited in the Main menu  Waypoints. (Menu



Waypoints)

3.3.3.1 Edit Waypoints

Waypoints

> Edit

> Delete all

By briefly pressing the OK key access is given to the menu

Edit WP.

By use of the keys ▲up or ▼down a WP can be selected.

F1 = adding WP

Using the F1 it is possible to create a new Waypoint.

(see keypad functions 3.3.3.2). By use of the OK key the new

waypoint is memorised and added to the WP list in alphabetical order.

In total 200 WP can be saved in the 6015-GPS.

F1 WP F2 7

>Flytec

>Stanserhorn

F2 = Delete actual WP

Pressing the F2 key (Del WP) enables the delete function.

F1 WP F2 7

>Flytec

>Stanserhorn

Remark: deleting a WP is performed immediately without further

query!

OK key = modify WP characteristics

After pressing the OK key it is possible to edit in this order the name,

the coordinates, the altitude and the cylinder circumference.

(see under keypad functions).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Flytec 6015 * Manuel d'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Flytec 6015 *