Flytec 6015 * Manuel d'utilisateur télécharger pdf (Page 23)

Operation Manual Flytec 6015 21

3.4 Routes

A route is an arrangement of various Waypoints over which one would like to reach a goal.

Of course, the Waypoints used on a Route have to be saved in the unit’s memory. Upon

arriving at the WP cylinder a long, unmistakable tone signalling

„Waypoint reached“ sounds

during 2sec. and the instrument skips automatically to the next waypoint of the Route.

It makes sense to store many well-known thermal sources as Waypoints along a route. The pilot does

not have to feel compelled to reach these Waypoints, at times he may be high enough to jump a

Waypoint on a Route, while at another time he may have already found the thermal he had hoped for

one or more kilometers before reaching the WP. Of course there is still the option of looking up other,

possibly closer, Waypoints without leaving the current Route by using the Goto-function.

Altogether the 6015-GPS provides the definition of up to 50 WP.

The one and same WP can be

used more than once along one Route

3.4.1 Creating a Route

In Main Setup Menu

⇒

Routes



Edit it is possible to arrange a Route

by inserting individual waypoints (max. 20) from the waypoints list into

the Route.

3.4.1.1 Route >Edit

Route

> Edit

> Del all WP

When menubar Edit is flashing, access is given to the menu item Edit

Route by briefly pressing the OK key.

Remark: it is not possible to edit an activated Route!

Therefore it is necessary to deactivate the Route prior to

editing.

F1 WP F2 7WP

>Flytec

>Stanserhorn

F1 = adding WP

After pressing the F1 key the waypoint list is opened. Search

with the © or ª arrow key a certain WP and confirm its entry

with the OK key. The new WP shall be added to the Route list

always before the selected WP or on the last empty row.

Waypoints list

>Stanserhorn

>Galm

F2 = delete WP

Pressing the key F2 (Del WP) deletes the selected WP from the

Route list. For data safety the 6015-GPS inquires again:

„delete WP?“. Deletion is to be confirmed with the OK key or

cancelled with the ESC key.

Delete WP 7

>Demo

Yes=OK No=Esc

OK = modify WP characteristics

In the list Routes WP it is possible to adjust individually for each WP

(copy from WP list) the cylinder circumference and the altitude.

After pressing the OK key the WP characteristics window is opened

indicating the selected WP name. With the ▲up or ▼down key the

altitude can be modified and acknowledged with the OK key,

subsequently the cylinder circumference can be set between 50

and 2’000 meters.

Flytec

620

Alt m

Flytec

400

CylRad m

Remark: modification of WP characteristics in a Route-WP does

not modify the original WP in the Main Instrument WP list!

ESC = Route editing - memorise and escape

Route saved!

When the Route has been created completely, press the ESC

key to save and to escape. After saving the data, the

instrument shall return to Main Setup Menu.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Flytec 6015 * Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Flytec 6015 *